• Predictive Analytics for Improved Cost Management  



Blog



Original Post Date: Wednesday, May 12, 2010 From my perspective as a cost researcher, the calibration tool is one of the most powerful analysis capabilities built into the TruePlanning cost management software . One way I can use this tool is to go back to an old estimate for a project that is now completed, and analyze the correctness of the previously entered input values. With this analysis, I can find ways to improve our methods of soliciting input values from the user to ensure the best values are entered the next time. This way, the TruePlanning models keep getting “smarter” as new information ...
Original Post Date: Friday, May 21, 2010 Last month I blogged about the importance of cost realism, its roots and how as estimators we must always reflect the truth, no matter how unpopular. This month I want to share with you a recent experience on a Source Selection. As part of the Source Selection team, my role was to conduct a Cost Realism estimate on each of the performers submitting bids. I want to share with you a few insights from that experience. One of the first rules I always follow is to never ask engineers to provide data that ...
Original Post Date: Wednesday, June 30, 2010  I recently had the opportunity to work directly for one of our clients on a high visibility, must-win proposal. The contractor was just about ready to commit to the bid number, but wanted to know the likely bids of the other two performers. We were asked to do a “Ghosting the Competition” study where we ethically collect open source data on two competing designs and combined with engineering technical data to develop a best cost estimate of the competitor’s bid positions.   Unfortunately, not much intelligence was known about the competing configurations, but the ...
Original Post Date: Tuesday, July 20, 2010 Next month (8/4 @ 12pm EST) I am presenting a webinar to discuss using TruePlanning on Source Selections. What prompted me to develop this webinar were the many recent success stories I’ve had using TruePlanning during the Source Selection process. Going a bit further, I am going to show an actual case study where TruePlanning was used to conduct an Analysis of Alternatives (AoA) exercise – along with cost/effectiveness results. We will explore a bit about the technical side of the proposed designs, develop the modeling in TruePlanning and discuss the results. In addition, we will explore ...
Original Post Date: Wednesday, September 1, 2010 I had expected to present my webinar,  “Best Practices for Cost Effectiveness Studies using TruePlanning” in early August. As you might know, I was planning to show a real world example from a recent engagement with a government customer. Unfortunately, since the Source Selection has not concluded with a downselect, I was not able to obtain the public release in time. However, for this month’s blog I will continue share some of the highlights of the webinar.   In last month’s blog we explored the uses of TruePlanning during Source Selection from the Supplier’s (or ...
Original Post Date: Tuesday, October 12, 2010 When I glanced at the Washington Post on Sunday, the following headline screamed out: Defense cuts could slow D.C. economy for years The article basically covers how Defense Secretary Robert M. Gates is calling for reducing spending on "support contractors" by 10 percent each of the next three years as the Defense budget shrinks. As Washington DC is a hub for these types of companies, the impact is expected to be significant. According to the article, more than a quarter of national defense spending contains of outlays for service contracts. Among the largest companies ...
Original Post Date: Wednesday, November 10, 2010 I was recently struck by Ash Carter’s (Under Secretary of Defense for Acquisition, Technology & Logistics) Memorandum for Acquisition Professionals, Better Buying Power: Guidance for Obtaining Greater Efficiency and Productivity in Defense Spending (14 September 2010). Within this broad sweeping memo, Ash Carter outlines 23 principal actions in five major areas aimed at increasing efficiency in Defense acquisition.  The first major area covered is “Target Affordability and Control Cost Growth”. Within this major area, program managers must treat affordability as a requirement before milestone authority is granted to proceed (starting with Milestone A). This ...
Original Post Date: Friday, December 17, 2010 In last month’s blog I wrote about Ash Carter’s (Under Secretary of Defense for Acquisition, Technology & Logistics) Memorandum for Acquisition Professionals, Better Buying Power: Guidance for Obtaining Greater Efficiency and Productivity in Defense Spending (14 September 2010). I concluded the TruePlanning unified framework and comprehensive cost models, is a tool very well suited to provide the types of analysis outlined in the memorandum. In terms of Should Cost and Independent Cost Estimates (ICE), TruePlanning estimation software provides the industry standard capability to conduct Should Cost and calibration (actual program history) for ICE. Most ...
Original Post Date: Wednesday, June 23, 2010 Parametric modeling is excellent for all aspects of early-concept cost estimation, including go/no-go decisions downstream. So, in the spirit of bringing a transparency to (ethical) financial engineering… why not apply our craft to pricing “real-options”? The latter are essentially strategic opportunities for engaging resources (cost/schedule) into projects, ventures, investments, or even abandonments. The opportunity choice has value itself!  Unlike static project Net Present Value (often, but not exclusively, approximated with Discounted Cash Flow) assuming pre-defined decisions, real-options reflect the merit of flexibility. If an R&D or proof-of-concept presents viability/ marketability learning, the option has positive value, above ...
Original Post Date: Friday, June 25, 2010  Like titanium and other exotic metal-materials, “composites” (by definition, combinations of materials) offer significant weight-savings and reduced part counts, but at a price of high production cost. Sound contrarian to our parametric cost estimating view?   Not really. Complexity of manufacture is quite higher. Likewise process index and structural tooling values grow. Plus, design lead times drive developmental cycles. That said, understand that composites represent more than a material type. They can involve a highly labor-intensive approach to preparing, braiding/ winding, molding, bonding and modular assemblage. Yes, some aspects of braiding and molding lend themselves to automation—which then drives tooling ...